dmesg - Intel Core i7-4700MQ - Intel HD 4600 - Notebook
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:02: setting system clock to 2016-09-17 20:07:07 UTC (1474142827)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
systemd-udevd[92]: starting version 215
random: systemd-udevd urandom read with 6 bits of entropy available
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
hidraw: raw HID events driver (C) Jiri Kosina
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (14 C)
rtsx_pci 0000:04:00.0: irq 41 for MSI/MSI-X
rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.2: irq 42 for MSI/MSI-X
ACPI: bus type USB registered
r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc9000001e000, 80:fa:5b:0f:50:e4, XID 08800880 IRQ 42
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x25 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 44
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 44
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a380 irq 44
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TC00, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208FB TC00 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
mmc0: new high speed SDHC card at address 0001
mmcblk0: mmc0:0001 SD 7.44 GiB (ro)
mmcblk0: p1
psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x450f02)
usb 3-7: new full-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2394.455 MHz
psmouse serio2: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 3-7: No LPM exit latency info found, disabling LPM.
usb 3-7: New USB device found, idVendor=0bda, idProduct=b002
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7: Product: Bluetooth Radio
usb 3-7: Manufacturer: Realtek
usb 3-7: SerialNumber: 00e04c000001
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATA-9: KINGSTON SV300S37A/120G, O1126A, max UDMA/133
ata6.00: 234441648 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA KINGSTON SV300S3 6A PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 5:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
sda: sda1 sda2 < sda5 sda6 > sda3
sd 5:0:0:0: [sda] Attached SCSI disk
usb 3-8: new high-speed USB device number 3 using xhci_hcd
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input6
raid6: sse2x1 7560 MB/s
usb 3-8: New USB device found, idVendor=04f2, idProduct=b43b
usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-8: Product: Chicony USB 2.0 Camera
usb 3-8: Manufacturer: Chicony Electronics Co.,Ltd.
usb 3-8: SerialNumber: 0x0001
raid6: sse2x2 9405 MB/s
raid6: sse2x4 11076 MB/s
raid6: avx2x1 14829 MB/s
raid6: avx2x2 17024 MB/s
raid6: avx2x4 19723 MB/s
raid6: using algorithm avx2x4 (19723 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 23915.000 MB/sec
Btrfs loaded
Switched to clocksource tsc
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: Cannot add dependency job for unit epmd@0.0.0.0.socket, ignoring: Unit epmd@0.0.0.0.socket failed to load: No such file or directory.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-htop.slice.
systemd[1]: Created slice system-htop.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
fuse init (API version 7.23)
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[245]: starting version 215
random: nonblocking pool is initialized
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input10
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input11
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input12
ACPI: Lid Switch [LID0]
ACPI: AC Adapter [AC] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
ACPI: Power Button [PWRF]
ACPI: Battery Slot [BAT0] (battery present)
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
EDAC ie31200: No ECC support
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input14
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
cfg80211: Calling CRDA to update world regulatory domain
MXM: GUID detected in BIOS
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
sound hdaudioC1D0: autoconfig: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Internal Mic=0x30
sound hdaudioC1D0: Mic=0x2b
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
AVX2 version of gcm_enc/dec engaged.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
i915 0000:00:02.0: irq 47 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
alg: No test for crc32 (crc32-pclmul)
[drm] VBT doesn't support DRRS
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b43b)
fbcon: inteldrmfb (fb0) is primary device
usbcore: registered new interface driver btusb
input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Using firmware rtlwifi/rtl8723befw.bin
rtlwifi: channel plan 0x20
rtlwifi: country code 11
rtl8723be 0000:03:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: errors=remount-ro
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:50/LNXVIDEO:00/input/input18
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
nouveau ![ DEVICE][0000:01:00.0] unknown Maxwell chipset
nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x118010a2
nouveau E[ DRM] failed to create 0x80000080, -22
nouveau: probe of 0000:01:00.0 failed with error -22
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
systemd-journald[241]: Received request to flush runtime journal from PID 1
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x24c offMax=0x1528
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.36_Debian (interface 0x001a000b).
vboxpci: IOMMU not found (not registered)
r8169 0000:04:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw
r8169 0000:04:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
IPv6: wlan0: IPv6 duplicate address fe80::aeb5:7dff:fe1c:df56 detected!
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: issuing reconnect request
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: issuing reconnect request
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: issuing reconnect request
wlan0: deauthenticating from 84:c9:b2:84:85:4a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
Freezing user space processes ... (elapsed 0.007 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sda] Synchronizing SCSI cache
sd 5:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 526.091 msecs
PM: late suspend of devices complete after 14.530 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
r8169 0000:04:00.2: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.378 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 16.017 msecs
PM: early resume of devices complete after 0.217 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
rtlwifi: wireless switch is on
r8169 0000:04:00.2: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
sd 5:0:0:0: [sda] Starting disk
r8169 0000:04:00.2 eth0: link down
usb 3-7: reset full-speed USB device number 2 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
usb 3-7: No LPM exit latency info found, disabling LPM.
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b8880
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b88c8
usb 3-8: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223b30cc0
PM: resume of devices complete after 720.857 msecs
PM: Finishing wakeup.
Restarting tasks ...
rtl8723be 0000:03:00.0: no hotplug settings from platform
rtsx_pci 0000:04:00.0: no hotplug settings from platform
r8169 0000:04:00.2: no hotplug settings from platform
done.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
IPv6: wlan0: IPv6 duplicate address fe80::aeb5:7dff:fe1c:df56 detected!
wlan0: deauthenticating from 84:c9:b2:84:85:4a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
Freezing user space processes ... (elapsed 0.014 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sda] Synchronizing SCSI cache
sd 5:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 800.152 msecs
PM: late suspend of devices complete after 14.507 msecs
r8169 0000:04:00.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.388 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 16.008 msecs
PM: early resume of devices complete after 0.218 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
rtlwifi: wireless switch is on
r8169 0000:04:00.2: System wakeup disabled by ACPI
sd 5:0:0:0: [sda] Starting disk
r8169 0000:04:00.2 eth0: link down
usb 3-8: reset high-speed USB device number 3 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/100
ata6.00: configured for UDMA/133
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223b30cc0
usb 3-7: reset full-speed USB device number 2 using xhci_hcd
usb 3-7: No LPM exit latency info found, disabling LPM.
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b8880
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b88c8
PM: resume of devices complete after 713.060 msecs
PM: Finishing wakeup.
Restarting tasks ...
rtl8723be 0000:03:00.0: no hotplug settings from platform
rtsx_pci 0000:04:00.0: no hotplug settings from platform
r8169 0000:04:00.2: no hotplug settings from platform
done.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
IPv6: wlan0: IPv6 duplicate address fe80::aeb5:7dff:fe1c:df56 detected!
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=4)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=4)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=4)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 - driver resynced.
wlan0: Connection to AP 84:c9:b2:84:85:4a lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=4)
wlan0: associated
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 - driver resynced.
perf interrupt took too long (2592 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 - driver resynced.
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 - driver resynced.
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 - driver resynced.
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 - driver resynced.
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 - driver resynced.
wlan0: deauthenticating from 84:c9:b2:84:85:4a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
Freezing user space processes ... (elapsed 0.023 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sda] Synchronizing SCSI cache
sd 5:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 799.223 msecs
PM: late suspend of devices complete after 14.889 msecs
r8169 0000:04:00.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.415 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 16.013 msecs
PM: early resume of devices complete after 0.205 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
rtlwifi: wireless switch is on
snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
r8169 0000:04:00.2: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
sd 5:0:0:0: [sda] Starting disk
r8169 0000:04:00.2 eth0: link down
usb 3-8: reset high-speed USB device number 3 using xhci_hcd
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223b30cc0
usb 3-7: reset full-speed USB device number 2 using xhci_hcd
usb 3-7: No LPM exit latency info found, disabling LPM.
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b8880
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b88c8
PM: resume of devices complete after 640.397 msecs
PM: Finishing wakeup.
Restarting tasks ...
rtl8723be 0000:03:00.0: no hotplug settings from platform
rtsx_pci 0000:04:00.0: no hotplug settings from platform
r8169 0000:04:00.2: no hotplug settings from platform
done.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
IPv6: wlan0: IPv6 duplicate address fe80::aeb5:7dff:fe1c:df56 detected!
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: issuing reconnect request
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: issuing reconnect request
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
psmouse serio2: issuing reconnect request
wlan0: deauthenticating from 84:c9:b2:84:85:4a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
Freezing user space processes ...
psmouse serio2: Touchpad at isa0060/serio2/input0 lost sync at byte 6
(elapsed 0.015 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sda] Synchronizing SCSI cache
sd 5:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 127.347 msecs
PM: late suspend of devices complete after 15.921 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
r8169 0000:04:00.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.417 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
[drm:hsw_unclaimed_reg_clear] *ERROR* Unknown unclaimed register before writing to c7204
[drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to c7204
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 16.038 msecs
PM: early resume of devices complete after 0.204 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
rtlwifi: wireless switch is on
r8169 0000:04:00.2: System wakeup disabled by ACPI
sd 5:0:0:0: [sda] Starting disk
r8169 0000:04:00.2 eth0: link down
usb 3-8: reset high-speed USB device number 3 using xhci_hcd
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223b30cc0
usb 3-7: reset full-speed USB device number 2 using xhci_hcd
usb 3-7: No LPM exit latency info found, disabling LPM.
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b8880
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b88c8
PM: resume of devices complete after 693.123 msecs
PM: Finishing wakeup.
Restarting tasks ...
rtl8723be 0000:03:00.0: no hotplug settings from platform
rtsx_pci 0000:04:00.0: no hotplug settings from platform
r8169 0000:04:00.2: no hotplug settings from platform
done.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
IPv6: wlan0: IPv6 duplicate address fe80::aeb5:7dff:fe1c:df56 detected!
wlan0: deauthenticating from 84:c9:b2:84:85:4a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
Freezing user space processes ... (elapsed 0.015 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sda] Synchronizing SCSI cache
sd 5:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 799.786 msecs
PM: late suspend of devices complete after 14.883 msecs
r8169 0000:04:00.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.396 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1e, date = 2015-08-13
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.846 msecs
PM: early resume of devices complete after 0.182 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
rtlwifi: wireless switch is on
snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
r8169 0000:04:00.2: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
sd 5:0:0:0: [sda] Starting disk
r8169 0000:04:00.2 eth0: link down
usb 3-8: reset high-speed USB device number 3 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/100
ata6.00: configured for UDMA/133
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223b30cc0
usb 3-7: reset full-speed USB device number 2 using xhci_hcd
usb 3-7: No LPM exit latency info found, disabling LPM.
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268bbc90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b8880
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802268b88c8
PM: resume of devices complete after 640.349 msecs
PM: Finishing wakeup.
Restarting tasks ...
rtl8723be 0000:03:00.0: no hotplug settings from platform
rtsx_pci 0000:04:00.0: no hotplug settings from platform
r8169 0000:04:00.2: no hotplug settings from platform
done.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 84:c9:b2:84:85:4a
wlan0: send auth to 84:c9:b2:84:85:4a (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 84:c9:b2:84:85:4a (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:84:85:4a (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
IPv6: wlan0: IPv6 duplicate address fe80::aeb5:7dff:fe1c:df56 detected!
perf interrupt took too long (5042 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf interrupt took too long (10047 > 10000), lowering kernel.perf_event_max_sample_rate to 12500